Alat- Alat Instrumen Tehnik
01. Capacitance Meter Tester Frequency AT610D
(Alat untuk Mengukur kapasitansi sebuah kapasitor)
Parameters : C,D,ESR,EPR, Q
Accuracy: 0.1%
frequency: 100 Hz,120Hz,1kHz,10kHz.
Display range :
C: 0.01pF-9999uF
D: 0.0001-9999Δ
%:- 9999% – 9999%
source Resistance 30 ohm- 100 ohm
Range : Automatic and manual
Signal level 0.3Vrms, 1 : 1
speed : 25t/s, 10t/s, 2ts.
Equivalent circuit : in series and paralel
Result display : 3 Paramaeters are displayed together in 5 dgt
show, ABS, %, ESR, EPR or sorting result
Adjustment : Open-circuit Point or sweep frequency zero reset
Comparator : 20 groups record , 3-bin sorting 99-bin sorting is available,beep
Impact protection: 1000V/10uF, 600V/80uF, 400V/150uF capacitance under electricity
impact protection
Interface:RS-232C(SCPI Programable language)Handler
Voltage : 198V AC – 240V AC freq:50 HZ Power : max 15 VA
Dimension : 264x 107 x 350 (mm)
02. Flammable Gas Leak Detector Digital Combustible Gas Alarm Meter SPD-202/EX.
(Alat pendeteksi kebocoran gas mudah terbakar)
Applications:
Gasleakage detecting of city gas
Combustible gas leakage detecting of petrochemical industry
Combustible gas leakage detecting of Shipbuilding industry
Combustible gas leakage detecting of Depot, gas station
Combustible gas leakage detecting of oil tank truck
Combustible gas leakage detecting of Fire and Rescue Industry
with recording function, can record up to 99 sets of data
Chameleon background lightning,white green and red, react three different measurement condition
acousti-optic alarming, easy to set
Power: 4 x 1.5v AA battery
Measured gas type : natural gas, liquefied petroleum gas, Coal gas and other combustible gas as well as organic solvent
volatilization gas of gasoline , alcohol, ketone, etc.
Measuring range : 0-100LEL 50-50000ppm
Resolution : 0.1 % LEL 10ppm
Measurement eror : <= 5%
Test result read time : 10 seconds
03. Handler Battery Tester AT-8612
(Alat Untuk Mengetahui kapasitas dan Kualitas batere)
Input Rating: 300W, 150V,30 A
CC : 0.~3A, Resolution : 0.0001A, Accuracy :0.05%;0~30A Resolution : 0.001A, Accuracy: 0,1%
CV : 0~18V, Resolution : 0.001V, Accuracy : 0.05%, 0~120V, Resolution 0.01V, Accuracy : 0.05%
CP : 0~100W, Resolution : 0.001W, Accuracy : 1% >100W, Resolution 0.001W, Accuracy : 1%
CR : 0.1~99Ω, Resolution : 0.01Ω, Accuracy : 1%, 100~4kΩ, Resolution 0.1Ω, Resolution 0.1Ω, accuracy: 1%
Accuracy : voltmeter accuracy 0.05%, Ampere meter accuracy : 0.1%
Short Circuit: current ≈ 30A, Resistance ≈ 40mΩ
dimension: 264 X 107 x 350 (mm)
voltage: 220V ac Frequency: 50Hz max Power : 20VA
Trigger: Internal/Bus/External
Interface: RS232C/Handler
Programming Language: SCPI and simple protocol
Display: 3.5 inches true-color LCD display screen
4W Remote sensing capability
04. Double Clamp Digital Phase Meter ETCR-4100
(Alat untuk mengukur phase dalam instalasi listrik)
Function: Various phases, Phase sequence test; Transformer groups, Inductive, capacitive circuit discrimination
Power source : Dc 9V Alkaline baterries
Sampling Rate : About 3 Times / sec
Range : 0~360
LCD display , blue backlight , suitable for dark places
Various phases , phase sequence test ; transformer groups , inductive,capacitive circuit discrimination
The line between the meter and the shell , 10M between the two voltage inputs
05. Clamp DC Current Sensor ETCR-030D.
(Alat untuk mengukur arus listrik)
Function : Measurement of DC current, DC leakage current
Test mode : Clamp CT
Power supply : 9V DC±1VDC
Rated Power :20 mA max
Clamp size : 25mm x 30mm
Range : 0-100mA DC or 0-10A DC optional
Resolution : 0.1mA DC or 10 mA DC optional
Accuracy ±3.0%FS(23˚C±2˚C, Below 70%RH,
keep the wire be in the center of clamp.
Coils Turn : 1:800
Signal output : 2.5mV/1mA (0,1A/0-2.5V)
Safety Rules : IEC1010-1, IEC1010-2-032, Pollution degree 2, CAT III(600V)
06. High accuracy,Shore Hardness Tester A Type LX-A-2.
(Alat pengukur tingkat kekerasan Material)
Needle indicates:
Type A : applicable to general rubber, synthetic rubber, Vulcanized rubber, soft rubber
leather, wax, Etc
Type c : applicable to the hardness test of rubber microporous material.
Type D : applicable to hard Rubber ,hard resin, acrylic, glass, Cushiony plastic cement, Printing plates,fiber , etc.
Parameters:
Type a.
Calibration value : 0-100HA
Resolution :1HA
Pressure head size : ⌽ 1.25mm
End pressure of pressure head :0.55N-8.05n
Type c.
Calibration value : 0-100HC
Resolution :1HC
Pressure head size : R2,5mm
End pressure of pressure head :0.55N-8.05n
Type D.
Calibration value : 0-100HD
Resolution :1HD
Pressure head size : ⌽ 1.25mm
End pressure of pressure head :0-44.5n
07. Solar Film Transmission Meter LS-101.
(Alat pengukur UV,IR penolakan dan transmisi cahaya)
Parameter :
Size : 160 x 115 x 33 (mm)
Testing opening : Wide 23mm x Height 76 mm
Weigh : 425g
Resolution : Measure value <10% is 0.1%, Other Range is 1%
Accuracy : 2%(colorless and transparent material)
UV center Wavelength : 365nm
Visible light wavelength: 380nm-760nm
IR center wavelength : 365nm
Power supply: 9V DC
UV Rejection meter, IR Rejection meter, Light Transmittance Meter, Three function in ONE device.
Self-calibration and auto-calibration, NO need any manual adjustments
Simple operation, putting the testing sample in the opening, UV Rejection, IR Rejection, Visible light transmission value of the sample will simultaneously display.
08.Precision Digital LCR Meter TH-2817C
(Alat untuk mengukur inductance (L), capacitance (C), dan resistance (R) dari komponen)
Basic accuracy : 0.1%
Equivalent circuits : Series parallel
Mathematical function : Absolute value deviation,A%
Measurement Speed : Fast 20,Med : 8, Slow : 2(times/second)(>1 khz)
Average times : 1-99
Calibration function: Open/short Frequency point, full Frequency correction
Measurement Terminal : 5 Terminal
Display mode : Direct ,A,A%
Signal frequency: 10 points: 50Hz,60Hz,100Hz,120Hz,1kHz,10kHz,20kHz,40kHz, 50kHz, 100kHz
Output Impedance: 30 ohm, 100 ohm
test level : 0.1 Vrms,).3Vrms, 1Vrms.
Special LCD display
10 typical measurement frequencies from 50Hz to 100kHz
Built-in ±2VDC bias voltage source, extendable to -5VDC~+5VDC bias voltage or max. bias current of 50mA(only TH2817C)
09.Combustible Gas Detector pen DY-80.
(Alat untuk mendeteksi kebocoran gas)
Detection : Natural gas(NG) Methane
Sensor : Planar Semiconductor.
Warm up time : within 60 seconds
Range of detection : CH4: 0~ 100% LEL
Alarm Time : within 20 Second
Range of Alarm : ~2%LEL (LED Yellow), ~10% LEL(LED Red)
Working temperature: -20C~70C
Working humidity: less Than 90% RH
Power source : AA1.5V *2
Dimension : 220 x 20 x 20 mm
Weight : Approx . 80 g
10. Digital Earth Ground Resistance Tester Meter DY-4200.
(alat resistance tester bumi untuk jalur distribusi listrik )
Earth Ground Resistance:
0/20/200/2000Ω +-(2% + 3)
Earth Voltage : 0~30v +-(3%+5%)
Resolution : 0.01Ω
LCD backlight
Data hold, auto power off,
low battery warning
Complete with test leads,
auxiliary earth bars, heavy duty case and
six 1.5V batteries
11. Solar Power Meter SM-206
(alat untuk menguji, mengukur intensitas energi surya atau tenaga matahari)
Specification:
Resolution : 0.1 W/m2, 0.1 Btu/ (ft2-h)
Error range : ±10W/m2[±3Btu/ (ft2-h)]or 5% of the measured value Temperature eror ±0.38W/m2/˚C [±0.12 Btu/(ft2-h/˚C]devistion at 25˚C
Display: 3-3/4LCD display, maximum displayed numerical value 3999
Range : 0.1-399.9 W/m2, 1-3999W/m2, 0.1-399.9Btu/(ft2-h)13999 Btu/ (ft2-h)
12. Optical Power Meter APM80C-V01.
(Alat untuk identifikasi dan mengukur gelombang pada serat optic)
Display Range :
1310/1490/1550/1625: +26 ~ -50 dBm, 850/1300 : +26 ~-30 dBm
Accuracy : ±2dB (At20±23˚C)
Calibrated Wavelengths :
850 nm/ 1300nm /1310nm / 1490nm / 1550nm/ 1625 nm
Display Resolving power: 0.01dB
Linearity:± 0.1db
OPM Connector : 2.5 mm universal And FC(SC,ST Adapter optional)
Vfl Connector : @.5 mm Universal
VFL Output : 1mW or 10mW, CW and Glint
LED Light : SOS code output
13. Oscilloscope 2Channels 1GS/s DSO-5102P
(alat ukur yang berfungsi memproyeksikan bentuk sinyal listrik agar dapat dilihat dan dipelajari.
Features :
100MHz bandwidths
1GSa/s Real Time sample rate
Large (7.0-inch) color display,WVGA(800×480)
Record length up to 24K
Trigger mode: edge/pulse width/line selectable video/slop/overtime etc.
USB host and device connectivity, standard
Multiple automatic measurements
Four math functions, including FFTs standard
Provides software for PC real-time analysis
VGA Optional
14. 4-Terminal Earth Resistance and Soil Resistivity Tester DY-4300B.
(alat resistance tester bumi untuk jalur distribusi listrik )
4Pole earth resistance measurement 0 to 20.99 kOhm with, resolution 0.01Ohm
Auto ranging soil resisistivity measurement 0 to 395,6kOhmm
series interference voltage Ust (Ac only) 0-30 vrms
Measures frequency, 400-500 Hz
Measuring voltage Um optional / Auto selected 10Vrms 94Hz, 105Hz, 111Hz, 128 Hz
Test Current Maximum 80mA
Advance Filtering method Based on FFT (fast fourier transform) reduces noise interference
compensation for residual~ resistance Rk
data memory 1000 sets
Conforms to CATIV 150V , CATIII 300v
15. Clamp On Ground Earth Resistance Tester Meter DY-1100.
(Alat pengujian ground dengan clamp)
Ground resistance measurements from 0.01 ohm to 1000 ohm with 0.01 ohm resolutions
Simplifies Ground resistance measurements on multiple point ground system
Round jaw
dual insulation for protection
Verivication Resistor confirm accuracy of meter.
Min. Resolution : 0.01 Ohm
Min Precision : +- 1%+0.01Ohm
Working humidity: 10%-80%
Working temperature: -10 C -55 C
16.Deep Memory Digital Storage Oscilloscope SDS-6062.
(Alat untuk memproyeksikan bentuk sinyal listrik agar dapat dilihat dan dipelajari)
Bandwith: 60MHz
Sample rate (real time) : 500MS/s (250MS/s for dual channel)
Horiontal scale (s/div) : 5ns/div~ 100s/div, step by 1~2~5
Rise time: <=5.8ns (at input, Typical)
Input impedance : 1Mohm+2% , in paralel with 15pF+5pF
channel isolation : 50 Hz,100 : 10 MHz : 40:1
Max input voltage: 400v(PK-PK) (DC+AC PK-PK)
Dc accuracy ± 3%
DC accuracy (average) : average > 16 ±(3% rdg + 0.05 div)for ΔV
Probe attenuation factor : 1x, 10x 100x,1000x
Low frequency response (AC ,-3Db) >= 5 Hz
Automatic measurements : Vpp, Vmax, Vmin, Vtop, VBase, Vamp, Vavg, Vrms
,Overshoot,Preshoot,Freq, Period, Rise Time,Fall Time, Delay A->B,+width,-Width,+Duty,-Duty
17.USB Virtual Multimeter USB/ Bluetooth Wireless Data Logger H365E
(alat pengukur listrik yang sering dikenal sebagai VOM (Volt-Ohm meter) dalam tampilan virtual.)
Parameter
DC Voltage :
RANGE : 60.000 mV -800V
Acurracy : +-1%+-1 digit
Resolution : 10uV – 1V
Ac Voltage :
Range: 60.00 mV – 600.0.0v
Accuracy : +-1%% +-3 digit
Resolution : 10uV – 100 mV
Dc current
Range : 60.00mA – 10.00A
Accuracy : +-1.5% +-1Digit – +- 1.5%+-3 Digit
Resolution : 10uA – 10 mA
Ac Current :
Range : 60.00mA-10.00A
Accuracy : +- 1.5% +- 1 digit – +-1.5% +-3 digit
Resolution : 10 uA – 10mA
Resistance :
Range : 600 -60.00M
Accuracy : +- 1% +-3digit – +- 1.5% +- 3 digit.
Resolution : 1Ohm – 1kOhm
Capacitance :
Range : 40.00nF – 400.0uF
Accuracy : +-1%+- 1digit
Resolution : 10pF-100pF
Diode : 0V-2.0V
18.2 Channels 48MS/s 20MHzBandwidth PC USB Digital Oscilloscope 6022BE
(Alat untuk memproyeksikan bentuk sinyal listrik secara virtual , agar dapat dilihat dan dipelajari)
Channel : 2 channels
Bandwith : 20 Mhz
Input Impedance : 1Mohm 25pF
Max. Sample rate : 48MS/s
Vertical Resolution : 8bit
Gain Range : 20 mV-5V, 8steps
DC accuracy : +- 3%
Timebase range: 1ns-9000s,39 steps
Input Protection : Diode Clamping
X-y : yes
Trigger Mode : Auto, Normal, and Single
Trigger slope : +/-
Trigger Level : Adjustable
Trigger type : Rising edge, Falling edge
Operating System : Windows 7, Windows NT, Windows 2000, Windows xp, Vista
19.1008A 8 Channels Oscilloscope
(alat ukur elektronika yang berfungsi memproyeksikan bentuk sinyal listrik agar dapat dilihat dan dipelajari)
Specifications:
Oscilloscope Mode
Vertical System :
Analog Channel 8
Input Impedance Resistance: 1MΩ
Input Sensitivity 10mV/div to 5V/div
Input Coupling DC
Resolution 12 bits
Horizontal System:
Memory Depth: 4K
Max . Input: 400V (DC+AC Peak)
Real-Time Sampling Rate: 2.4MSa/s
Time Base Range : 1ns/div to 20000s/div(1-2-5sequences)
Time Base Precision: ±50ppm
Trigger System:
Trigger Source CH1, CH2,CH3,CH4, CH5, CH6,CH7,CH8
Trigger Mode:Edge
Cursors and Measurement
Voltage Measurement:Vpp, Vamp, Vma x , Vmin, Vtop, Vmid, Vbase,Vavg, Vrms, Vcrms, Preshoot, Overshoot
Time Measurement:Frequency, Period, Rise Time, Fall Time, Positive Width, Negative Width, Duty Cycle
Cursors Measurement:Horizontal ,Vertical Track, Auto Measure Modes
Waveform Signal Process:+, – , x , ÷, FFT, Invert
Voltage Range
10mV to 5V/div @ x 1 probe
100mV to 50V/div @ x 10 probe
10V to 5000V/div @ x 1000 probe
100V to 50000V/div @ x 10000 probe
200mV to 100V/div @ 20:1
Current Range
100mA to 50.0A/div @ CC65(20A)
1000mA to 500.0A/div @ CC65(65A)
1A to 100.0A/div @ CC650(60A)
10A to 1000.0A/div@ CC650(650A)
1A to 200.0A/div @CC1100(100A)
10A to 2000.0A/div @CC1100(1100A)
FFT:Rectangular, Hanning, Hamming, Blackman Window
Math:Addition, subtraction, multiplication, division
20.Current Coating Thickness Gauge ED-400
(alat ukur ketebalan cat yang praktis dan didesain untuk pengukuran lapisan non-destruktif,) .
Bandwith: 60MHz
Sample rate (real time) : 500MS/s (250MS/s for dual channel)
Horiontal scale (s/div) : 5ns/div~ 100s/div, step by 1~2~5
Rise time: <=5.8ns (at input, Typical)
Input impedance : 1Mohm+2% , in paralel with 15pF+5pF
channel isolation : 50 Hz,100 : 10 MHz : 40:1
Max input voltage: 400v(PK-PK) (DC+AC PK-PK)
Dc accuracy ± 3%
DC accuracy (average) : average > 16 ±(3% rdg + 0.05 div)for ΔV
Probe attenuation factor : 1x, 10x 100x,1000x
Low frequency response (AC ,-3Db) >= 5 Hz
Automatic measurements : Vpp, Vmax, Vmin, Vtop, VBase, Vamp, Vavg, Vrms
,Overshoot,Preshoot,Freq, Period, Rise Time,Fall Time, Delay A->B,+width,-Width,+Duty,-Duty
21.Portable Aluminum Alloys Hardness Tester Meter ASTM(934-1)
(Alat Pengukur tingkat kekerasan alumunium alloy)
Measuring Scope 0-20 HW
Resolution: 0.5HW
Weight: 0.5kg
application range: aluminium alloy
Hardness Range: 25- 11HRE ,58-13 HRV
Specimen Dimension (mm): Thicjness0.4-8 Inner, Diameter> 6
Standard Package: Tester, Standar harness/block
22.Thin Wall Pipe Superficial Rockwell Hardness Tester Rockwell Hardness Tester PHR1ST
(Alat untuk mengukur tingkat kekerasan pipa tipis )
Magnetic type Rockwell hardness Tester.
Initial Test Force : 3kg
Total test force : 15kg
Force applying Method : By screw.
Indenter: 1.588mm Carbide ball
Accuracy : Meets the requirement ofiso 6508
Resolution : 0.5 HR
Testing Range : Hr15T,HR15W,HR15X Hr15Y
23.TV Signal Level Meter CATV Cable Testing RYS200
(Alat yang digunakan , mengendalikan kamera PTZ, menangkap data server , pengujian kabel LAN dll)
FREQUENCY Scope : 47-870
Modulation DVB-C/ITU.
Support: 64QAM/256QAM(option)
Digital Average power : 30dBuv-110dBuv
Precision : +- 2 DB
Symbol rate: 1MS/S-7ms.-7MS/S
Modulate Error time : 22dB-39dB
BIt Error Rate: Rs 1E-3_1E-9
24.Digital Portable Optical Identifier Fiber Ranger RYFR3303B
Operating Wavelength : 1310nm/1550nm +-20nm
Fiber Type : sm
Max Displaying Distance30/32 dB (100-120km)
Optical Connector type : FC/PC
Reflection event dead zone : 15 M
VFL Wavelength(option):650nmaces
VFL Output power(option) 5mW
Storage Memory :1000 traces
LCD : 640*480, 5.1 inch,TFT
Communication interface : USB
Power Supply : External Power 9V 2A, Battery 7,4V
Language : English Chinese
Working Temperature : 5^C~40*C
Storage Temperature : -10*C ~60*C
Dimensions: 215mm*130mm*66mm
Weight: 1kg
25.CCTV Tester Visual Fiber Tester/Cable Search HVT2622
(Alat yang digunakan untuk menampilkan video, mengendalikan kamera PTZ, menghasilkan gambar, menangkap data server , pengujian kabel LAN dll)
Operating Wavelength : 1310nm/1550nm +-20nm
Fiber Type : sm
Max Displaying Distance30/32 dB (100-120km)
Optical Connector type : FC/PC
Reflection event dead zone : 15 M
VFL Wavelength(option):650nmaces
VFL Output power(option) 5mW
Storage Memory :1000 traces
LCD : 640*480, 5.1 inch,TFT
Communication interface : USB
Power Supply : External Power 9V 2A, Battery 7,4V
Language : English Chinese
Working Temperature : 5^C~40*C
Storage Temperature : -10*C ~60*C
Dimensions: 215mm*130mm*66mm
Weight: 1kg
26.Signal Level Meter RYS110D
(Alat untuk mengukur dan menampilkan amplitudo pada frekuensi standar)
Frequency scope : 5~870Mhz
Channel : U.S. Digital Standard USA STD-CATV
FreQuency Accuracy : +-50*10e-6 (20^C+-5^C)
Measuring range : 3 0dBuV~120 dBuV
Measurement Accuracy :+-50^10E-6(20*C+-5^C)
Resolution : 0.5 dB
Carrier To Noise Ratio Management
Measuring range : 20dB~50dB
Signal Input Range : >=85dBuV
Measurement accuracy: +- 3db (20^C+-5^C)
Channel scan : 150
Voltage Measurement :
Input Range : 1~100V(AC/DC)
Measurement Accuracy : +-2V
Resolution : 1V
Power supply
Battery : 7.2V/!500mAh rechargeable battery
Ac Supply :Ac 90V-220V 50HHz-60Hz
Working Time :6h
Charging time : 3h
27.Optical Light Source RY-LS300
(perangkat untuk mengukur power atau kekuatan dalam sinyal Optic yang mengacu pada uji daya rata-rata dalam sistem serat optic)
Wavelength (nm):850/1300/1310/1550nm
Emmiter type : Fp-LD or others please specify
Output Power : -6~-7(1310nm/1550nm)
Output stability : +0.05 dB/15 Mins:+0.1 dB/8hours
Modulation Frequencies:CW/2(650nm)/270,1K2K(1310nm/1550nm)
optical connector : FC/PC
Power supply: Alkaline Battery (3 AA 1.5 Batteries)
Battery Operating Hour : 45
Operating temperature (0C) : -25~ +60
Storage Temperature: -25 ~ +70
Dimension : 172*82*33 (mm)
28.Datacom Transmission Analyzers RYE4300C
(Alat untuk menganalisis data transmisi.)
Operating Wavelength : 1310nm/1550nm +-20nm
Fiber Type : sm
Max Displaying Distance30/32 dB (100-120km)
Optical Connector type : FC/PC
Reflection event dead zone : 15 M
VFL Wavelength(option):650nmaces
VFL Output power(option) 5mW
Storage Memory :1000 traces
LCD : 640*480, 5.1 inch,TFT
Communication interface : USB
Power Supply : External Power 9V 2A, Battery 7,4V
Language : English Chinese
Working Temperature : 5^C~40*C
Storage Temperature : -10*C ~60*C
Dimensions: 215mm*130mm*66mm
Weight: 1kg
29.Ultrasonic Flowmeter Large Transducer TUF2000SW.
(Alat untuk menentukan kecepatan alir cairan dengan menggunakan ultrasonic)
Protection Level : IP65
Humidity:<=85% RH
temperature:-20~60^ celcius
Basic Parameter:
accuracy <=1%
Velocity range : 0~+- 10m/s,Bi-directional measurement
Pipe size : DN32~DN6000mm
Temperature -30^C~160^C
Type of Liquid:Single liquid that can transmit ultrasound, such as water,sea water, sewage, Oil ,alcohol, Etc
Pipe material : Steel, Stainless steel,cast iron, cooper, PVC, Alumunium,Glass steel, Liner is allowed
signal output :
1 way 4-20mA output
1 way OCT pulse output
1 Way Relay output
Signal input : 3 way 4-20mA input, achieve to heat measurement by connecting PT100 Platinum Resistor
Interface : RS485, Support MODBUS
Data storage : SD card Regularly store the pre-set results(optional)
Power supply : Dc~36V or AC85~264V
30.Single needle gauge tension tester meter TG501
(Alat untuk mengukur tegangan statis dari semua belt)
Max Measured Value: 50G
Division value:2G
Measuring Range:10-50-10
31. Non Contact 3 Phase Rotation Tester Indicator Detector ETCR-1000A
(Alat untuk mendeteksi dan menentukan phase pada rangkaian listrik)
Function: Phase detection
Voltage Detection method: Static induction
Object to be connected : Insulated wire (nominal sectional area of the conductor; 2 to 120mm2, finished outer diameter : up to 17 mm
Performance guarantee voltage range : 3 Phase, 70V to 600 vac(sine wave,Continuous)
Operating frequency range : 45 Hz – 66 Hz
Operating temperature and Humidity : -10 to 40 (32 to 104),80%RH or less (with no condensation)
Storage temperature and humidity : _20 to 60 (-4 to 140 ), 80%RH or less (with no condensation)
location for use: altitude up to 2000 m(6562 feet), indoors.
Maximum rated voltage to earth : 600v
dielectric strength : 5.4k Vrms
Power supply :Rated supply voltage 1.5×2 Two size AA size batteries
maximum Rated Power :300 m VA
continuous operating time : Approx 70 hours
Auto power off : The power will be turned off automatically if the instrument remains idle for 15 min after the power is turned on
32.Fiber Optic Metal Pentype Visual Fault Locator RYV3105
(Alat untuk untuk tracking, routing serat dan kontinuitas cacheing dalam jaringan optic,dari instalasi sampai setelah instalasi .)
Type : Pen type Visual vault finder
Central Wavelength : 650 nm+- 10 nm (635nm can be required on request)
Emitter Type : FP-LD
Output Power : Optional Choice for 1mw, 5mw, 10 mw , 20mw, 30 mw on actual needs
optical connector : For 1.25 mm connector, FC (male)-LC (female)
Oerating temperature :-10~45(‘C)
Storage Temperature : -40~70(‘C)
33.4 Channels Memory Depth Frequency Counter DSO3064 Kit VII
(Alat instrumen elektronik yang digunakan untuk mengukur frekuensi)
Vertical system
Analog channels : 4
Bandwidth : 60 Hz (-3Db)
Rise Time : 5.8ns
Input impedance : Resistance: 1MOhm;Capacitance : 25 pF
Input Sensitivity : 10mV/div to 5V/div
Input Coupling : AC/DC/GND
Vertical Resolution :8 Bits
Memory depth : 10K-16M/CH
Maximum input : 400V (DC+AC peak)
Horizontal System
Real Time Sampling Rate 200MS/s
Time Base Range 5ns : 5ns/div to 1000s/div (1-2-5 sequences)
Time base Precision : +-50 PPm
Trigger system :
Source: CH1,CH2,CH3,CH4,EXT
Mode : EDGE, Pulse , Video, Alternative
Voltage Measurement : Vpp,Vamp, Vmax,Vmin, Vtop, Vmid, Vbase,Vavg, Vrms, Vcrms, Preshoot, Overshoot, frequency,Period,rise time, Fall time ,Positive Width, Negative width, Duty Cycle
Cursor measurement : Horizontal,Vertical, Track, Auto Measure Modes
Waveform Signal Process : +,-,x,/,FFT, Invert
Voltage range :
10mV to 5V/div @ x 1Probe
100mV to 50V/div @ x 10Probe
1V to 500V/div @ x 100Probe
10V to 5000V/div @ x 1000Probe
100V to 50000V/div @ x 10000Probe
200mV to 100V/div @ 20 : 1
Current range : CC65(20A),CC65(60A),CC650,CC1100
FFT : Rectangular,Hanning,Hammingm,Blackman Window
Math : Adition, subtraction,multiplication,division.
34. Optical Loss Tester AMU900
(Alat dipakai untuk mengukur total loss dalam sebuah link optic)
Laser source
Wave length 1310nm & 1550nm/1310nm & 1490nm &1550nm
Stabilization : +- 0.05dB/1 hour; 0,1dB/8hours
Output power : > -6.0dBm
Modulation : 270 Hz, 1KHz 2Khz
Fiber adapter : FC/PC
Visual vault Locator :
Output Power > 1mW (5km)/>10mW(10Km)
Glint : 2Hz
Fiber adapter : @.5 mm universal adapter
Power meter
Measuring range : +6~-70dBm + 26~ -50dBM
Accuracy : +- 0.2dB
Calibrated Wave lengths : 850nm/ 1300nm/1310nm/1490nm/ 1550nm/1625nm
35. Pen Type Digital Multimeter YH100.
(Alat untuk dipakai adalah alat ukur yang dipakai untuk mengukur tegangan listrik, arus listrik, dan tahanan )
Confrom the Ied 1010-1 Standard cat III 600V
The Overmolding rubbwe case protect the meter
Display : 1999 counts
Auto/Manual range
maximum Value hold
Data Hold ,
Auto power off
DCV : 200m/2/20/200/600v +- 0.7 200m/ACV
ACV : 200M/2/20/200/500
Resistance :200/2k/20 k
Continuity test
Non-contact AV voltage
36.Loop Calibrator YHS717.
(Alat untuk untuk bekerja dengan 4-20 mA loop untuk kontrol proses lingkaran kalibrator seperti mA sourcing, simulasi dan pengukuran, readouts)
Current Measurement
Range : 0 to 24 mA
Resolution : 0,001 mA
Accuracy : 0.025% Rdg+ 2
Current sourcing
Range : 0 to 20 mA or 4 to 20 mA
Accuracy : 0.025% Rdg + 2
Drive capability : 1200 Ohm;950ohm at 20 mA in HART mode
Current Simulation
Range : 0to 20mA or 4 to 20 mA
accuracy : 0.025% Rdg + 2
Ext. loop Voltage Requirement: 12-30V
loop power : while measuring mA , 24V
Voltage Measurement
Range : 0 to 28 V DC
Resolution : 1mv
accuracy : 0,025% Rdg +2
37. Gloss meter KSJ Mini
(Alat untuk pengukuran kilap atau tingkat kecerahan pantulan cahaya yang dihasilkan sesuai dengan standar kilap. Intensitas tergantung pada material dan sudut pencahayaan.)
Reading range : 0.0~ 199 GU
Measuring Range : 0.0 ~150 GU
Indication Error : +- 2 GU
Measuring Area : 20x10mm2
Incidence angle : 60Deg
Volume : (LxWxH) 123x38x65 mm3
Main weight : 300g
38.Digital Force Gauge Push Pull Gauge HF30.
(Alat untuk mengukur kekuatan mekanik seperti kompresi atau ketegangan)
Peak load value:
N:20
Kg :2
Lbs:4.4
Load division value :
n : 0.01
kg : 0.001
Lbs : 0.001
Indication error : 0.50%
Unit: N/Kg/lbs
Data Interface : Rs232 Nine Hole Socket
Power : Rechargeable Batteries,charger (charging Voltage 100v-240V)
Sensor structure : S-tye sensor with high Precision(inner sensor)
Ambient temperature : 5*C~35*C
Transport temperature : -10*C~60*C
Relative humidity : 15%~80%RH
Working Conditions : No hypnocenter and corrosive medium
39.Digital High-Speed Impact Torque Tester AGN20
(Alat untuk mengukur torsi impuls)
Measuring Range / Division value
Nm : 20.000/0.001
Kg/cm :204,21/0.01
Lb/in : 17.24/0.01
Precision :+- 1% F.S
Peak Value Sampling Frequncy: 2000Hz
Power : 8.4v 1.2VX7 Ni-MH battery group.
charging time : 4~6Hours
Continuous Using time Of baterry : About 10 Hours
40.Programmable LED DC Electronic Load M-9812B
(Alat untuk menguji dan juga mengevaluasi beragam sumber daya yang terdapat pada arus dc)
Input rating
Power : 300W
Current : 0-30A
Voltage : 0-150 V
CCmode
Range : 0-3A ~ 0-30A
Resolution : 0.1mA ~ 1mA
Accuracy : 0.03%+0.05%FS ~ 0.03%+0.05%FS
Cv Mode
Range : 0.1 -19.999V ~ 0.1-150V
Resolution : 1mV ~ 10mV
Accuracy : 0.03%+0.02FS ~ 0.03%+0,02%FS
CR Mode(Voltage and current input value >=10% full measurement)
Range : 0.03 – 10K Oh ~ 0.03~5K Oh
Resolution : 16 Bit
CW Mode : (Voltage and Current input Value >= 10% full measurement)
Range : 0-300W
Resolution : 1mW ~ 10mW
Accuracy : 0.1% + 0.1%FS ~ 0.1% + 0.1%FS
Voltage Measurement
Voltage : 0-19.999v ~ 0-150 V
Resolution :1mV ~ 10mV
Accuracy : 0.015%+0.03FS ~ 0.015%+0.03%FS
Current Measurement
Current : 0-3A ~ 0-30A
Resolution : 0.01mA
Accuracy : 0.03% + 0.05FS ~ 0.03 + 0.08%FS
Power Measurement (Voltage and current input Value >= 10% full Measurement)
power : 100 W ~ 300 W
resolution : 1mW~10mW
Accuracy : 0.1% + 0,1%FS ~ 0.1% + 0.1%FS